Manual Mode

Manual Mode

Select Floating Menu

  1. Click on the floating menu in the lower right corner:



Enter Manual Operation

  1. Select "Manual Operation" from the menu: 



Manual Mode Menu

  1. In manual mode, you can adjust the water spray level, suction level, and squeegee position as needed: 



Adjust Cleaning Mode Settings


  1. There are pre-configured modes on the right side of the interface
  2. Select any mode to start manual operation quickly

Alert
Note: Settings will not be saved for future use




Start Manual Cleaning

  1. Click the start button and use the robot to complete the cleaning task manually: 



Stop Manual Cleaning

  1. Click the stop button:




    • Related Articles

    • Stop a Task- Emergency Stop Button

      Emergency Stop Button - Stop Task To stop the cleaning task immediately, press the emergency stop button Emergency Stop Button - Resume Task To resume the task, twist and pull up on the emergency stop button If the task was paused through the use of ...